Exhaust System
SPECIFICATIONS Torque Specifications a Refer to the procedure in this section. DESCRIPTION AND OPERATION Exhaust System Component Location The 2.0L Gasoline Turbocharged Direct Injection (GTDI) ...Fuel System - General Information
SPECIFICATIONS General Specifications Torque Specifications DESCRIPTION AND OPERATION Fuel System 2.0L Gasoline Turbocharged Direct Injection (GTDI) The fuel system: is a variable speed Cl ...Other materials:
General Procedures
Solenoid Body Identification Procedure
Original Solenoid Body Service Tag
Using the scan tool, select Powertrain, Transmission and Transmission
Solenoid Body Identification from the toolbox icon and follow the
instructions displayed on the scan tool.
The solenoid body identification screen di ...
Removal and Installation
Hood Latch
Removal and Installation
Remove the upper radiator sight shield.
Remove the 8 screws.
Remove the 4 bolts.
Remove the 2 pin-type retainers.
NOTE: Mark the position of the hood latch prior to removing the
hood latch bolts.Remove the 2 bolts and position t ...
Headlamp exit delay
You can set the delay time to keep the headlamps on for up to three
minutes after the ignition is turned off.
Follow the steps below to change the delay time (Steps 1 through 6
must be done within 10 seconds):
1. Turn the ignition off.
2. Turn the lighting control to the autolamp position.
...