MyKey

Programming/Changing Configurable Settings Use the information display to access your configurable MyKey settings: 1. Switch the ignition on using an admin key. If your vehicle has push-button star ...

Locking and unlocking

You can use the power door lock control or the remote control to lock and unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passenger door panels ...

Other materials:

Vehicle identification number
The vehicle identification number is located on the driver’s side instrument panel. Please note that in the graphic, XXXX is representative of your vehicle identification number. The Vehicle Identification Number (VIN) contains the following information: A. World manufacturer identif ...

Installation
Engine Special Tool(s) Material All vehicles Using the Floor Crane and Spreader Bar, align the transaxle to the engine. Align the transaxle to the engine and install the 5 transaxle-to-engine bolts. Tighten to 48 Nm (35 lb-ft). Install the 2 engine-to-transaxle bolts. ...

General Procedures
Accessing Mounting Bolts On an Inoperative Power Seat General Equipment Drill(s) WARNING: Wear protective gloves when handling components or parts that have pointed or sharp edges. Failure to follow this instruction may result in serious personal injury. NOTE: Typical driver seat shown, ot ...