Center console

Stow items in the cupholder carefully as items may become loose during hard braking, acceleration or collisions, including hot drinks which may spill. Note: The appearance and features of the cen ...

Starting and Stopping the Engine

GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not p ...

Other materials:

Removal and Installation
Hood Latch Removal and Installation Remove the upper radiator sight shield. Remove the 8 screws. Remove the 4 bolts. Remove the 2 pin-type retainers. NOTE: Mark the position of the hood latch prior to removing the hood latch bolts.Remove the 2 bolts and position t ...

Adjusting the headlamps
The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, an authorized dealer should check the alignment of your headlamps. Vertical Aim Adjustment 1. Park the vehicle directly in front of a wall or screen on a level surface, approximate ...

Specifications, Description and Operation, General Procedures
SPECIFICATIONS Material General Specifications Torque Specifications a Tighten to 10 Nm (89 lb-in) plus an additional 720 degrees. b Tighten to 16 Nm (142 lb-in) plus an additional 180 degrees. c Refer to the procedure in this section.d Tighten to 5 Nm (44 lb-in) plus a ...