Airbag disposal

Contact your authorized dealer as soon as possible. Airbags must be disposed of by qualified personnel. ...

General information on radio frequencies

This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmfu ...

Other materials:

Disassembly and Assembly of Subassemblies
Cylinder Head Special Tool(s) Material Disassembly NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan can cause en ...

Removal and Installation
Safety Belt Anchor and Pretensioner Special Tool(s) Removal and Installation  WARNING: All safety belt components must be inspected and corrected as part of any collision repair. Inspect all safety belt components as prescribed by Safety Belt Inspection and Repair After a Collision found in ...

Headlamp exit delay
You can set the delay time to keep the headlamps on for up to three minutes after the ignition is turned off. Follow the steps below to change the delay time (Steps 1 through 6 must be done within 10 seconds): 1. Turn the ignition off. 2. Turn the lighting control to the autolamp position. ...