Stability Control

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel or tire size may change the handlin ...

Sensing system

WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects wh ...

Other materials:

General Procedures
Camshaft Bearing Journal Diameter NOTE: Refer to the appropriate Section 303-01 for the specification. Measure each camshaft journal diameter in 2 directions. Camshaft Journal to Bearing Clearance - OHC Engines NOTE: Refer to the appropriate Section 303-01 for the specification. ...

Adjusting the headlamps
The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, an authorized dealer should check the alignment of your headlamps. Vertical Aim Adjustment 1. Park the vehicle directly in front of a wall or screen on a level surface, approximate ...

General Procedures
Cooling System Draining, Filling and Bleeding Special Tool(s) Material Draining With the vehicle in NEUTRAL, position it on a hoist. Refer to Section 100-02.  WARNING: Always allow the engine to cool before opening the cooling system. Do not unscrew the coolant pressure relief ...