A. Off
B. Parking lamps, instrument panel lamps, license plate lamps and tail lamps
C. Headlamps
High Beams
• Push the lever toward the instrument panel to activate.
• Push the lever toward the instrument panel again or pull the lever towards you to deactivate.
Headlamp Flasher
• Pull toward you slightly to activate and release to deactivate.
Lighting
...Autolamps
WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. ...Other materials:
General Procedures
Air Conditioning (A/C) Clutch Air Gap Adjustment
Check the A/C clutch air gap at 3 equally spaced places between the
clutch plate and the A/C clutch pulley.
Remove the clutch plate. Add or remove spacers between the clutch plate
hub and the compressor shaft until the clearance is within ...
Four Wheel Drive (4WD) Systems
DESCRIPTION AND OPERATION
All Wheel Drive (AWD) Systems
The AWD system consists of the following:
PTU
Rear driveshaft
AWD relay module
Rear axle with ATC solenoid
Torque from the engine is transferred through the transmission to the PTU.
This torque is transferre ...
Engine Emission Control
SPECIFICATIONS
Material
Torque Specifications
DESCRIPTION AND OPERATION
Engine Emission Control
Component Locations
2.0L GTDI
3.5L Ti-VCT and
3.7L Ti-VCT
3.5L GTDI
System Operation
Refer to the PC/ED manual
section 1 Description and Operation.
Component ...