Battery, Mounting and Cables

SPECIFICATIONS General Specifications Torque Specifications DESCRIPTION AND OPERATION Battery and Cables Overview The battery and cable system consists of the following components: Battery ...

Information and Entertainment Systems - 4.2-Inch (107 mm) Screen, 4 Or 6 Speakers

...

Other materials:

Disassembly and Assembly of Subassemblies
Cylinder Head Special Tool(s) Material Cylinder Head NOTE: RH shown, LH similar. Disassembly NOTE: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into their original locations. Using the Valve Spring Comp ...

Changing the vehicle battery
WARNING: Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near the battery, always shield your face and protect your eyes. Always provide proper ventilation. WARNING: W ...

Headlamp exit delay
You can set the delay time to keep the headlamps on for up to three minutes after the ignition is turned off. Follow the steps below to change the delay time (Steps 1 through 6 must be done within 10 seconds): 1. Turn the ignition off. 2. Turn the lighting control to the autolamp position. ...