Ford Taurus Owners Manual: Part numbers

1 Refer to scheduled maintenance information for the appropriate


1 Refer to scheduled maintenance information for the appropriate intervals for changing the spark plugs.

Note: Replace the spark plugs with ones that meet Ford material and design specifications for your vehicle, such as Motorcraft® or equivalent replacement parts. The customer warranty may be void for any damage to the engine if such spark plugs are not used.

    Capacities and Specifications
    Engine Drivebelt Routing 3.5L V6 engine 3.5L V6 SHO engine 2.0L EcoBoost engine ...

    Vehicle identification number
    The vehicle identification number is located on the driver’s side instrument panel. Please note that in the graphic, XXXX is representative of your vehicle identification number. The Vehic ...

    Other materials:

    Specifications, Description and Operation
    SPECIFICATIONS Material Torque Specifications a Refer to the procedure for the specification. General Specifications Solenoid Operation Chart a Turns on above 8 km/h (5 mph). b Turns off above 8 km/h (5 mph). CB = Clutch brake NC = Normally closed NH = Normally high ...

    Driveline System - General Information
    SPECIFICATIONS Material General Specifications DESCRIPTION AND OPERATION Driveline System The driveline system consists of the following components: Center support bearing Driveshaft assembly Front halfshafts Rear halfshafts Active Torque Coupling (ATC)/rear axle On Front Wheel Drive (FWD ...

    Specifications, Description and Operation, General Procedures
    SPECIFICATIONS Material General Specifications Torque Specifications a Tighten to 10 Nm (89 lb-in) plus an additional 720 degrees. b Tighten to 16 Nm (142 lb-in) plus an additional 180 degrees. c Refer to the procedure in this section.d Tighten to 5 Nm (44 lb-in) plus ...