The childproof locks are located on the rear edge of each rear door and must be set separately for each door.
When these locks are set, the rear doors cannot be opened from the inside.
• Insert the key and turn to the lock position (key horizontal) to engage the childproof locks.
• Insert the key and turn to the unlock position (key vertical) to disengage the childproof locks.
Installing child seats
Child Seats
Use a child safety seat (sometimes
called an infant carrier, convertible
seat, or toddler seat) for infants,
toddlers or children weighing
40 pounds (18 kilograms) or less
(general ...
Safety Belts
PRINCIPLES OF OPERATION
WARNING: Never let a passenger hold a child on his or her lap
while your vehicle is moving. The passenger cannot protect the
child from injury in a crash.
WARNING: It is ex ...
Other materials:
Removal and Installation
Hood Latch
Removal and Installation
Remove the upper radiator sight shield.
Remove the 8 screws.
Remove the 4 bolts.
Remove the 2 pin-type retainers.
NOTE: Mark the position of the hood latch prior to removing the
hood latch bolts.Remove the 2 bolts and position t ...
Removal and Installation
Glass, Frames and Mechanisms - Exploded View, Front Door
For additional information, refer to the procedures in this section.
Window Glass - Front Door
Removal and Installation
NOTE: The power window regulator motor must be de-initialized, then
initialized whenever the LH/RH front (SHO, L ...
Diagnosis and Testing
Engine Cooling
Special Tool(s)
Material
Principles of Operation
Engine coolant flows primarily from the engine to the radiator circuit and
back to the coolant pump. Coolant is sent from the coolant pump through the
engine block and cylinder heads. Separate circuits from the engine also feed the ...
