Ford Taurus Owners Manual: Waxing

Regular waxing is necessary to protect the paint on your car from the elements. We recommend that you wash and wax the painted surface once or twice a year.

When washing and waxing, park your vehicle in a shaded area out of direct sunlight. Always wash your vehicle before applying wax.

• Use a quality wax that does not contain abrasives.

• Follow the manufacturer’s instructions to apply and remove the wax.

• Apply a small amount of wax in a back-and-forth motion, not in circles.

• Do not allow wax to come in contact with any non-body (low-gloss black) colored trim. The wax discolors or stains the parts over time, such as:

• Bumpers

• Grained door handles

• Side mouldings

• Mirror housings

• Windshield cowl area.

• Do not apply wax to glass areas.

• After waxing, your car’s paint should feel smooth, and be free of streaks and smudges.

    Cleaning the exterior
    Wash your vehicle regularly with cool or lukewarm water and a neutral pH shampoo, such as Motorcraft® Detail Wash. • Never use strong household detergents or soap, such as dish washing or laun ...

    Repairing minor paint damage
    Your authorized dealer has touch-up paint to match your vehicle’s color. Take your color code (printed on a sticker in the driver’s door jamb) to an authorized dealer to make sure you get the ...

    Other materials:

    Diagnosis and Testing
    Automatic Transmission Special Tool(s) Material DTC Chart Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Section 100-00 for information about these practices. For all other DTCs, refe ...

    General Procedures
    Headlamp Adjustment Special Tool(s) Headlamp Adjustment Screw Location Headlamp Aiming The headlamp aiming procedure depends on what type of beam pattern the headlamp is equipped with. Vehicles may come equipped with visually optically aligned left (VOL) or visually optically aligned right ( ...

    Disassembly and Assembly of Subassemblies
    Cylinder Head Special Tool(s) Material Cylinder Head NOTE: RH shown, LH similar. Disassembly NOTE: If the components are to be reinstalled, they must be installed in the same positions. Mark the components for installation into their original locations. Using the Valve Spring Comp ...