DESCRIPTION AND OPERATION
Universal Transmitter
Overview
The universal transmitter operates garage doors, gates and home or office lighting and security systems.
System Operation
Universal Home Transmitter
The universal transmitter learns a hand-held transmitter radio frequency code and stores the code in memory. It consists of 3 buttons, each with its own indicator lamp. Once the universal transmitter code is stored, the universal transmitter emits the radio frequency of the hand-held transmitter when the corresponding button is pressed. The universal transmitter can store 3 unique transmitter codes at a time. The universal transmitter and LH vanity mirror lamp share the same power and ground circuits. Both components are part of the LH sun visor.
DIAGNOSIS AND TESTING
Universal Transmitter
Special Tool(s)
Inspection and Verification
- Verify the customer concern.
- Visually inspect for obvious signs of mechanical or electrical damage.
Visual Inspection Chart
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the cause is not visually evident, verify the symptom. GO to Symptom Chart.
Symptom Chart
Pinpoint Tests
Pinpoint Test A: The Universal Transmitter is Inoperative
Normal Operation
The universal transmitter and LH vanity mirror lamp share the same circuits. Both components are part of the LH sun visor.
This pinpoint test is intended to diagnose the following:
- Interior lamps concern
- Universal transmitter (part of the LH sun visor)
PINPOINT TEST A: THE UNIVERSAL TRANSMITTER IS INOPERATIVE
Anti-Theft - Passive Anti-Theft System (PATS), With Intelligent Access (IA)
DESCRIPTION AND OPERATION
Anti-Theft
Component Location
RFA Module
Backup Transceiver
TPM Module
Passive Start Antenna (3 required)
Overview
PATS deters the vehicle from theft by ...
Cruise Control - Non-Adaptive
DESCRIPTION AND OPERATION
Cruise Control
Overview
The cruise control system is controlled by the PCM. The cruise control mode
is selected from the steering wheel mounted switches (ON/OFF, SET, CNCL a ...
Other materials:
Sync applications and services (if equipped)
Note: In order for the following features to work, your cellular phone
must be compatible with SYNC. To check your phone’s compatibility, visit
www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca.
• SYNC Services (if equipped, United States only): Provides access to
traffic, direct ...
Specifications, Description and Operation
SPECIFICATIONS
Material
Torque Specifications
DESCRIPTION AND OPERATION
Glass, Frames and Mechanisms
Overview
The accessory delay relay, located in the BCM, provides voltage for the
operation of the power windows and the roof opening panel (if equipped). Refer
to Delayed Accessory Power.
St ...
Specifications, Description and Operation
SPECIFICATIONS
Torque Specifications
DESCRIPTION AND OPERATION
External Controls
The transmission selector lever linkage consists of:
a selector lever cable that connects the transmission manual control
lever to the selector lever assembly.
a BSIA that is integral to the selector l ...
