The memory control, located on the side seat panel, allows positioning recall of the: • Driver seat.
• Power mirrors.
• Adjustable pedals (if equipped).
• Power tilt/telescopic steering column (if equipped).
A. Type 1
B. Type 2
Programming a memory position
Note: You can program a memory position at any time.
• To program a position, move the memory features to the desired positions using the associated controls. Press and hold the desired memory button for at least two seconds. A chime will sound confirming that a memory position has been set.
• To program another position, repeat the previous procedure using the other buttons.
Recalling a memory position
You can recall a programmed memory position: • In any gearshift position if the ignition is not on.
• Only in park (P) or neutral (N) if the ignition is on.
Press the desired memory control to recall a memory position.
Recalling a memory position with the remote control
The memory positions are also recalled when you press unlock on your remote control (if the transmitter is programmed to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position. If you enable the easy entry feature, the seat will first
move to the easy entry position. The seat will move to the final position when the key is in the ignition or when the push button start system is put in accessory mode or started.
To program the memory feature to a remote control, see the Keys and remote control chapter.
Easy Entry and Exit Feature (If Equipped)
This feature can move the seat rearward and the optional steering column up and forward to allow extra room to exit the vehicle.
This occurs when: • You place the transmission in neutral (N) or park (P), and • You turn the ignition off.
The seat and steering wheel will move to their original positions when: • You place the transmission in neutral (N) or park (P), and • You turn the ignition on.
Turn the Easy Entry/Exit feature on or off through the information display settings menu. See the Information Displays chapter.
Power seats
WARNING: Never adjust the driver’s seat or seat back when the vehicle is moving. WARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trap ...Heated seats
WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, m ...Other materials:
Waxing
Regular waxing is necessary to protect the paint on your car from the
elements. We recommend that you wash and wax the painted surface
once or twice a year.
When washing and waxing, park your vehicle in a shaded area out of
direct sunlight. Always wash your vehicle before applying wax.
• ...
Cruise Control - Non-Adaptive
DESCRIPTION AND OPERATION
Cruise Control
Overview
The cruise control system is controlled by the PCM. The cruise control mode
is selected from the steering wheel mounted switches (ON/OFF, SET, CNCL and RES)
which are integrated into the LH steering wheel switch. The cruise control
system maintain ...
Temporary mobility kit
Note: The temporary mobility kit sealant compound in the canister is
to
be used for one tire only. See your Ford authorized dealer for additional
replacement sealant canisters.
Your vehicle may be equipped with a temporary mobility kit (located in
the spare tire well in the trunk). The tempo ...