- General information
- Opening and closing the hood
- Under hood overview
- Engine oil dipstick
- Engine oil check
- Adding Engine Oil
- Engine coolant check
- Transmission fluid check
- Changing the vehicle battery
- Checking the wiper blades
- Changing the wiper blades
- Air filter(s)
- Adjusting the headlamps
- Changing a bulb
- Bulb specification chart
Fuse specification chart
Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution b ...General information
Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers who are there to help you with their professional servi ...Other materials:
In-Vehicle Repair
Upper Intake Manifold
Removal
NOTICE: If the engine is repaired or replaced because of upper
engine failure, typically including valve or piston damage, check the intake
manifold for metal debris. If metal debris is found, install a new intake
manifold. Failure to follow these instructions c ...
General Procedures
Camshaft Bearing Journal Diameter
NOTE: Refer to the appropriate Section 303-01 for the specification.
Measure each camshaft journal diameter in 2 directions.
Camshaft Journal to Bearing Clearance - OHC Engines
NOTE: Refer to the appropriate Section 303-01 for the specification.
...
Body Closures
SPECIFICATIONS
Torque Specifications
GENERAL PROCEDURES
Door Adjustment - Front
Loosen the front door hinge-to-front door bolts until the front door is
able to move slightly.
Align the front door.
Align the front door body angles to the rear door.
Be sure that the front door is flush ...