- Specifications, Description and Operation
- Diagnosis and Testing
- General Procedures
- Removal and Installation
Removal and Installation
Hood Latch Removal and Installation Remove the upper radiator sight shield. Remove the 8 screws. Remove the 4 bolts. Remove the 2 pin-type retainers. NOTE: Mark the p ...Specifications, Description and Operation
SPECIFICATIONS Material Torque Specifications DESCRIPTION AND OPERATION Handles, Locks, Latches and Entry Systems Overview The power lock/unlock feature locks or unlocks the doors upon a custo ...Other materials:
Changing the vehicle battery
WARNING: Batteries normally produce explosive gases which
can cause personal injury. Therefore, do not allow flames, sparks
or lighted substances to come near the battery. When working near the
battery, always shield your face and protect your eyes. Always provide
proper ventilation.
WARNING: W ...
Lighting control
A. Off
B. Parking lamps, instrument panel
lamps, license plate lamps and tail
lamps
C. Headlamps
High Beams
• Push the lever toward the
instrument panel to activate.
• Push the lever toward the
instrument panel again or pull
the lever towards you to
deactivate.
Headlamp Flasher ...
Daytime running lamps
WARNING: Always remember to turn on your headlamps at
dusk or during inclement weather. The Daytime Running Lamp
(DRL) system does not activate the tail lamps and generally may not
provide adequate lighting during these conditions. Failure to activate
your headlamps under these conditions may re ...