- Specifications, Description and Operation
- Diagnosis and Testing
- General Procedures
- Removal and Installation
Disassembly and Assembly
Seat Backrest - Front Disassembly Seat Backrest - Trim Parts Seat Backrest - Frame Parts With Manual Lumbar and Static Lumbar Seat Backrest - Frame Parts With Power Lumbar Seat Cushion - With Ac ...Specifications, Description and Operation
SPECIFICATIONS Material Torque Specifications DESCRIPTION AND OPERATION Glass, Frames and Mechanisms Overview The accessory delay relay, located in the BCM, provides voltage for the operation ...Other materials:
Removal and Installation
Generator - 2.0L GTDI
Removal
Disconnect the battery. For additional information, refer to Section
414-01.
Remove the upper Charge Air Cooler (CAC) pipe. For additional
information, refer to Intake Air System Components - Exploded View
in Section 303-12.
...
General Procedures
Timing Adjustment
NOTE: Any time a roof opening panel motor is removed, the
cables/mechanisms can experience free-play movement. It is important that the
cables do not move. They are timed to be parallel with each other. If one or
both are moved in either direction, they must be re-timed.
NO ...
General Procedures
Cooling System Draining, Filling and Bleeding
Special Tool(s)
Material
Draining
With the vehicle in NEUTRAL, position it on a hoist. Refer to Section
100-02.
WARNING:
Always allow the engine to cool before opening the cooling system. Do not
unscrew the coolant pressure relief ...