Ford Taurus Owners Manual: Fuse specification chart

Power Distribution Box

WARNING:

Always disconnect the battery before servicing high current fuses.

WARNING:

To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs.

The power distribution box is located in the engine compartment. It has high-current fuses that protect your vehicle’s main electrical systems from overloads.

If the battery has been disconnected and reconnected, see Changing the Vehicle Battery in the Maintenance chapter.

The high-current fuses are coded as follows:


The high-current fuses are coded as follows:





Passenger Compartment Fuse Panel


Passenger Compartment Fuse Panel

The fuse panel is located under the instrument panel to the left of the


The fuse panel is located under the instrument panel to the left of the steering wheel. You may need to remove a trim panel to access it.

The fuses are coded as follows.



Maintenance


    Changing a fuse
    Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrica ...

    Other materials:

    Body Closures
    SPECIFICATIONS Torque Specifications GENERAL PROCEDURES Door Adjustment - Front Loosen the front door hinge-to-front door bolts until the front door is able to move slightly. Align the front door. Align the front door body angles to the rear door. Be sure that the front door is flush ...

    Disassembly
    Engine Special Tool(s) Material NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure. NOTE:& ...

    Diagnosis and Testing
    Information and Entertainment System Special Tool(s) DTC Chart(s) NOTE: For SYNC related concerns, REFER to the SYNC Symptom Chart before connecting the scan tool and beginning DTC-based diagnostics. Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagn ...