General Procedures
Air Conditioning (A/C) Clutch Air Gap Adjustment Check the A/C clutch air gap at 3 equally spaced places between the clutch plate and the A/C clutch pulley. Remove the clutch plate. Add or ...Specifications, Description and Operation
SPECIFICATIONS Material Torque Specifications DESCRIPTION AND OPERATION Air Conditioning The A/C system components include the following: A/C compressor and clutch assembly A/C condenser core A/ ...Other materials:
Fuel Charging and Controls - 2.0L GTDI
SPECIFICATIONS
Material
Torque Specifications
a Refer to the procedure in this section.
DESCRIPTION AND OPERATION
Fuel Charging and Controls
Component Locations
WARNING: Do
not smoke, carry lighted tobacco or have an open flame of any type when working
on or near any fuel-related component. ...
Cruise Control - Non-Adaptive
DESCRIPTION AND OPERATION
Cruise Control
Overview
The cruise control system is controlled by the PCM. The cruise control mode
is selected from the steering wheel mounted switches (ON/OFF, SET, CNCL and RES)
which are integrated into the LH steering wheel switch. The cruise control
system maintain ...
Diagnosis and Testing
Automatic Transmission
Special Tool(s)
Material
DTC Chart
Diagnostics in this manual assume a certain skill level and knowledge of
Ford-specific diagnostic practices. Refer to Diagnostic Methods in Section
100-00 for information about these practices.
For all other DTCs, refe ...