Removal and Installation
Clockspring Removal and Installation WARNING: If the clockspring is not correctly centralized, it may fail prematurely. If in doubt, repeat the centralizing procedure. Failure to follow these ...Specifications, Description and Operation
SPECIFICATIONS Material DESCRIPTION AND OPERATION Body WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components must be new, ...Other materials:
Removal and Installation
Exterior Mirror
Removal and Installation
NOTE: Do not remove the exterior mirror assembly when repairing an
individual part. Individual components can be installed without removing the
exterior mirror.
Remove the sail panel.
Pull outward on the sail panel to release the retaining clips.
...
Horn
SPECIFICATIONS
Torque Specifications
DESCRIPTION AND OPERATION
Horn
Component Location
Overview
The horn emits an audible tone when the driver air bag module is pressed. The
horn output is controlled by a relay, which is integral to the BCM.
System Operation
System Diagram
Horn Operation
T ...
Engine coolant check
Checking the Engine Coolant
The concentration and level of engine coolant should be checked at the
intervals listed in Scheduled Maintenance Information.
Note: Make sure that the level is at the FULL COLD level or within the
COLD FILL RANGE in the coolant reservoir.
Note: Coolant expands wh ...