- Specifications, Description and Operation
- Diagnosis and Testing
- General Procedures
- Removal and Installation
Transaxle/Transmission Cooling - 6F35
SPECIFICATIONS Material Torque Specifications DESCRIPTION AND OPERATION Transaxle Cooling The transmission fluid cooling system consists of the following: OTA transmission fluid cooler Front ...Specifications, Description and Operation
SPECIFICATIONS Torque Specifications DESCRIPTION AND OPERATION External Controls The transmission selector lever linkage consists of: a selector lever cable that connects the transmission manual ...Other materials:
Specifications, Description and Operation, Diagnosis and Testing
SPECIFICATIONS
Material
General Specifications
Torque Specifications
a Refer to the procedure in this section.
b 15 Nm plus an additional 60 degrees
c 8 Nm plus an additional 180 degrees
DESCRIPTION AND OPERATION
Engine
Overview
The 2.0L GTDI 4-cylinder engine has ...
Specifications, Description and Operation, General Procedures
SPECIFICATIONS
Material
General Specifications
Torque Specifications
a Tighten to 10 Nm (89 lb-in) plus an additional 720 degrees.
b Tighten to 16 Nm (142 lb-in) plus an additional 180 degrees.
c Refer to the procedure in this section.d Tighten to 5 Nm (44 lb-in) plus a ...
Front Suspension
SPECIFICATIONS
Material
Torque Specifications
a Refer to the procedure in this section.
DESCRIPTION AND OPERATION
Front Suspension
The front suspension consists of the following components:
Wheel bearing and wheel hubs
Wheel studs
Lower arms
Stabilizer bar
Stabilizer bar links
Struts
...